The Signalling Record Society

RailRef Line Codes SB

A point rod detector was devised by Atkinson, Engineer of the Manchester, Sheffield & Lincolnshire Railway.

It was installed at Retford in 1852.

This page should be regarded as “Work in Progress”. The webmaster will welcome additional information for this page.

In the list below the information is set out in tabular form, spread over four columns. The column entries are -

RailRef	The Line Code used in RailRef system.
Line Detail	The principal locations included within the Line Code. They are arranged in 'down' direction order. Locations shown are primarily stations and junctions to allow easy cross check against published atlases. Signal box names appear in italics where these are 'intermediate' to stations or have been shown to facilitate links from other pages on this web site. The inclusion of a station or junction name does not imply that there was always a signal box of that same name!
SBR	The section reference used in the relevant Signal Box Register published by the Society.
ELR	The corresponding Engineer's Line Reference(s). This will be blank for railways that never came within British Railways terms of reference. It will also be blank where British Railways had no surviving responsibility for infrastructure at the time the ELR system came into use.

Explanation of column content is here.

RailRef	Line Detail	SBR	ELR
SB001	Snailbeach - Pontesbury Snailbeach Pontesbury Junction Starts (or ends) at transfer sidings by Pontesbury Signal Box.
SB002	Snailbeach Mine Branch 337482 302278
SB003	Smelting Works 337371 303030
SB004	Callow Hill and Habberley Quarries Branch